Installation manual

Recording Data

• Select the FORMAT menu and select the format you want to use.

For example, you can select “Mac files & folders”.

NOTE: If you are not sure of the format to use, drag and drop the files onto the main

Toast screen and Toast will automatically select the format.

• From the main Toast screen click on the “Data” button.

• At the next screen click on the “Add” button.

• Then at the third window, select Mac HDD or desktop and work your way

down the directory structure.

• Click on the files or folders you want to select and click on “Add”.

• Then click on “Done”.

• From the Data screen click “Done”.

You are now back at the Toast 4.0.1.1 main screen.

• Click on “S e a r c h ” to detect your Que! Drive “Mitsumi 4804TE USB:

QPS Drive”.

• Click on Write CD (disc tray will open, insert a blank disc).

You are now at the Write Disc screen.

• Select Speed: 1x, 2x or 4x speed

• Select Write session to allow for more data at a later time.

• Select “Write Disc” to close and finalize the disc. (This is what you should

select if you plan to send the CD you made elsewhere).

NOTE: Write at 4x speed with 4X certified media.

Enable Simulation only to test your Que! Drive.

Click on Write Session to keep the disc open for additional data.

Click on Write to Disc to close the disc.

Your Que! Drive’s LED will turn red when it is starting to write.

Mac Installation