Installation manual

Step 2. Attach the other end of the USB interface cable to the USB port on

the back of the Que! USB Drive.

Step 3. Attach the power adapter to the back of the Que! USB Drive. Plug one

end of power cable to the back of the power adapter and the other

end to the grounded power outlet.

Step 4. Do not turn on the power to the Que! USB Drive unitl you have installed

the Adaptec Toast software.

Note: The Que! USB Drive will not mount itself on the desktop until you have

finished installing the software and restart your system.

Step 5. Congratulations! Now refer to your

software installation procedures on the

following page.

Note: Your Que! USB Drive will not be able to

eject until you have installed the Adaptec

Toast mastering software and restart your

Mac.

Mac Installation