Installation manual

CR-4802TE Specifications
Supported Disc Formats
CD-ROM Mode 1; CD-DA; CD-i; Video CD; CD-Extra (CD Plus)
CD-ROM XA Mode 2 Form 1 and Form 2; Photo CD
Writing Methods Disc-at-Once, Track-at-Once, Multisession,
Packet Writing
Disc Diameters 12 cm, 8 cm
Interface ATAPI specification SFF-8020i/8080
Data Transfer Rate (Average)
Read: 1200Kbytes/sec (Mode 1), 1400 Kbytes/sec (Mode 2)
Write: 600 Kbytes/sec (Mode 1), 700 Kbytes/sec (Mode 2)
IDE Data Transfer Rate (Burst)
11.1 Mbytes/sec (16 bits PIO mode)
13.3 Mbytes/sec (Multiword DMA mode)
Average Access Speeds (including the latency time)
Random 150 ms typical
Full Stroke 250 ms typical
Data Buffer Size 2 Mbyte
Audio
Channels 2 channels
Sampling Frequency 44.1 kHz
Filtering 4 times over-sampling, digital/analog filters
Quantization 1 bit (16bits linear equivalent)
Volume Control Software, L& R separate volume control
Reliability (MTBF)
Power on hour 50,000 hours
Dimensions and Weight
Width/Height/Depth 148 x 42 x 210 mm
Weight 0.9 kgW max.
Power Supply
DC +5V +5V +/-5%, 2.00A max. @ 8x full stroke
DC +12V +12V +/-5%, 2.80A max. @ 8x full stroke
Environmental Conditions
Operating: 5~40°C, 20 to 85% RH non-condensing
Storage: -20~60°C, 10 to 95% RH non-condensing