Installation manual

CR-4804TE Specifications
Supported disc formats
CD-ROM Mode 1; CD-DA; CD-i; Video CD; CD-Extra (CD plus)
CD-ROM XA Mode 2 Form 1 and Form 2; Photo CD
Writing Methods Disc-at-Once, Track-at-Once, Multisession,
Packet Writing
Disc diameters 12 cm, 8 cm
Interface ATAPI specification SFF-8020i/8080
Data transfer rate
Read:(MAX) 3600 Kbytes/sec (Mode 1), 4200 Kbytes/sec (Mode 2)
Write:(average) 600 Kbytes/sec (Mode 1), 700 Kbytes/sec (Mode 2)
IDE Data transfer rate (Burst)
16.6 Mbytes/sec (16 bits PIO mode)
16.6 Mbytes/sec (Multiword DMA mode)
Average Access speeds (including the latency time)
Random 135 ms typical
Full Stroke 220 ms typical
Data Buffer Size 2 Mbyte
Audio
Channels 2 channels
Sampling Frequency 44.1 kHz
Filtering 8 times over-sampling, digital/analog filters
Quantization 1 bit
Volume Control Software, L& R separate volume control
Reliability (MTBF)
Power on hour 50,000 hours
Dimensions and weight
Width/Height/Depth 148 x 42 x 210 mm
Weight 0.9 kgW max.
Power Supply
DC +5V +5V +/-5%, 2.00A max. @ 20x full stroke
DC +12V +12V +/-5%, 2.90A max. @ 20x full stroke
Environmental conditions
Operating 5~40°C, 20 to 85%RH non-condensing
Storage: -20~60°C, 10 to 95%RH non-condensing