Operation Manual
Table Of Contents
- WARNING:
- CAUTION:
- NOTE:
- WARNING
- CAUTION
- WARNING
- Important safeguards
- Overview
- Overview (continued)
- Remote control
- Installation
- Basic connections
- Basic connections (continued)
- Preparation
- Basic operation
- Basic operation (continued)
- Basic operation (continued)
- Menu operation
- Menu operation (continued)
- Menu operation (continued)
- Menu operation (continued)
- Menu operation (continued)
- Image adjustment
- Image adjustment (continued)
- Advanced features
- Advanced features (continued)
- Lamp replacement
- Lamp replacement (continued)
- Troubleshooting
- Troubleshooting (continued)
- Troubleshooting (continued)
- Indicators
- Specifications
- Specifications (continued)
- Specifications (continued)
EN-10
Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB
output connectors.
Important:
• Make sure that the connected device is turned off before starting connection.
• Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord.
• When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.
• See the owner’s guide of each device for details about its connections.
Projector + AV device
Important:
• Match the colors of the video and audio plugs on the Audio cable with those of the terminals.
• Speaker output is mono.
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such DVD player with this projector, use the
COMPUTER IN terminal.
Important:
• The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.
• The terminal’s names vary depending on the connected devices.
• Use a Mini D-SUB 15-pin - BNC conversion cable for connection.
• Image may not be projected correctly with some DVD players.
• When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.
S-VIDEO IN
(option)
AUDIO IN
(option)
to audio output (L)
to audio output (R)
to S-video output
VCR, etc.
AUDIO L
AUDIO R
(option)
* A mini-plug audio cable can also be used.
BR
DVD player or HDTV decoder
Audio cable (option)
to audio output
BNC - RCA connector (option)
No connection
COMPUTER IN
Mini D-SUB 15-pin - BNC conversion
cable (option)