Extra Information

EN-6
 Menu bar
Configuration Youcanspecifythefollowingsettings:
AddNewGroup: Youcancreateanewgroup.
EditScheduleSetting: Youcaneditschedulesettingssetforexistinggroups.
SearchProjector: Automaticallysearchesavailableprojectors.
AssignIP: YoucancongureIPsettingsoftheprojector.
EditProjectorSetting: Youcaneditprojectorsettings.
EditE-mailSetting: YoucancongureE-mailsettingsusedforthisapplication.
SearchProjectorSetting: Youcanspecifyasearchrangeforcommunicationwiththeprojectorviaa
router.
SystemConguration: Youcanconguresystemsettingsofthisapplication.
Help The version information is displayed.
 Tool bar
ProjectorView This projector does not support this function.
Telnet This projector does not support this function.
Visual PA2 Youcandisplayalineofanytextontheprojectorscreen(VisualPA2enabled
projectors only). For details, see page 21.
Remote Controller RemoteControllerwindowcanbedisplayedtooperatetheprojector.Youcanturn
on/offthepower,andselecttheinputsource.
Refresh Status ThecurrentstatusofPower,InputSource,AVMute,andLampTime1/2(Low)ofthe
projectors being displayed in the projector list can be reacquired. The status of Input
SourceandAVMutewillnotbeobtainedunderthefollowingconditions:
• whentheprojectorispoweredoff
• duringwarm-uporcool-down.
Select All Allprojectorscurrentlydisplayedontheprojectorlistcanbesettoselected/non
selected state.
Exit Youcanexit“ProjectorViewGlobal+”.However,youcannotexittheapplication
during the automatic projector search and the projector status loading. Even during
theprojectorstatusacquisition,youcanexittheapplicationforcefullybyclickingthe
button at the upper right corner of the main screen. In this case, Windows warning
message is displayed.
 Group Name Group of the projector can be selected. When you select “All”, all the registered
projectors are displayed. Newly created group(s) are added to the list. When you
select your choice of group, all projectors that belong to the selected group are
displayed.
3. Main screen

 



