Specifications

www.m16canz.com
8
3. Connect the DC power supply (either 9V or 5V) to the board. The black DC socket is center-
positive and accepts DC voltage ranging from 8-12V. If a 5V regulated DC power supply is
available, use the DC screw-in terminal block. Set jumper JP8 accordingly such that LED D2 is lit
when power supply has been applied to the board.
4. Once the SK board has been powered up, run the Flash Start program.
5. Enter the path of the monitor program object file in the FilePath field and enter all “00” on the ID
field.