Specifications

www.m16canz.com
6
3. Verify if
EditPlus
is setup correctly by going to TM Project Editor window and double clicking your
C source file in the project file tree.
EditPlus
should automatically run and load your selected
source file.
V. KD30 DEBUGGER SETUP:
The KD30 debugger software installed in your PC talks to the monitor program written the M16C/62
Flash on the target board via serial cable in order to perform its debugging functions. The monitor
program provides KD30 with the debugging information it displays in its various windows. To write the
monitor program to the M16C/62 Flash on the SK board, the Flash Start programming software is
used.
M16C/62 Flash
with Monitor
Program
KD30