Specifications

www.m16canz.com
13
b. Enter the file path of lmc30 (normally C:\Mtool\BIN\lmc30.exe).
c. Enter ‘%X’ in the Parameters field. This will pass the target program name to lmc30.
d. Click the OK button. LMC30 will now be created in the TM Project Bar.
4. Run LMC30 from the TM Project Bar. This will now automatically create the machine language file
in Motorola S format (.mot) from the absolute module file (.x30) in your project directory.
Writing the Target Program to M16C/62 Flash in the SK Board
1. Set up the SK Board as in Monitor Program Installation procedure and make sure that the CNVss
jumper is on.
2. Run the Flash Start program from the TM Project Bar. Load the machine language file (*.mot) and
type all “00” on the ID field. Click the OK button.