Operating instructions

CHANNEL EDIT Menu: Memory and Name
Memory
(Figure 1)
After all available channels have been
memorized with Memorize Channels (page 31 ),
weaker channels viewed with Ant-A or Ant-B
can be added and unwanted channels can be
deleted.
Use the CHANNEL button on the remote control
to view memorized channels.
Name
(Figure 2)
Channels shown on Ant-A or Ant-B can be given
names (up to four characters). After you enter
a name, it will appear on the TV screen next to
the channel number.
[] Select Ant-A or Ant-B.
[] Select the memorized channel you want to
name.
[] Press ADJUST until you see the
underline highlighted in the Name field.
[] Use ADJUST ,= or v to select letters A-Z,
numbers 0-9, and/or symbols (!.&'/:*- and
blank) for each character of the name you
would like for the selected channel. Press
ENTER after choosing each letter and
after the name is complete. If you want to
change your selection while on the option
field, use CANCEL to delete the current
character. You will move one position back.
If you press CANCEL while at the first
character, the entire name will be deleted.
Figure 1. Memory
Figure 2. Name