Operating instructions

Part I1: Installation
WARNING:
N_teiThe_yba_kpanel_nd_o_ne_t!QnsshQ_ DVD Player with Component Video
herb b_ for _efere_cb _!_ a_d may _r_ by (Figure 1)
Connecting a DVD Player
I
u
Figure 1. Connecting a DVD Player with Component
Video.
Connecting an S-Video
Device
'IV back _n_l _led_V_,e,u)
Connect the Component Video cables from
(YCbCr or YPbPr) VIDEO OUT on the
back of the DVD player to COMPONENT-1
or COMPONENT-2 on the TV back panel,
matching the correct components:
[] YtoY
[] CborPbtoPb
[] CrorPrtoPr
... Connect a set of audio cables from AUDIO
OUT on the back of the DVD player to
COMPONENT AUDIO Input 1 or 2 on
the TV back panel. The white cable []
connects to the L (left)channel, and the
red cable [] connects to the R (right)
channel.
| M P Q RTA _T
@@
@
@
Other S-Video Device
(Figure 2)
[] Connect an S-Video cable from VIDEO OUT
on the device back panel to VIDEO INPUT-1
or INPUT-2 on the TV back panel.
[] Connect a set of audio cables from AUDIO
OUT on the device back panel to AUDIO
INPUT-1 or INPUT-2 on the TV back panel.
•The red cable connects to the R (right)
channel and the white cable connects to
the L (left) channel.
•If your S-Video Device is mono (non-
stereo), connect only the white (left) cable.
Figure 2. Connecting S-Video Device.