Operating instructions

Connecting an Antenna, Wall Outlet Cable, or Cable Box

Separate UHF and VHF Antennas

(Figure 1)

[] Connect the UHF and VHF antenna leads

to the UHFNHF combiner.

[] Push the combiner onto ANT-A on the TV

back panel.

UHF/VHF combiners are not provided

with the TV. They are available at most

electronic stores.

Twin Lead Antenna, Coaxial Lead

Antenna, or Wall Outlet Cable

For antenna with twin flat leads (Figure 2)

[] Connect the 300ohm twin leads to the

transformer.

[] Push the 75ohm side of the transformer

onto ANT-A on the TV back panel.

300ohm to 75ohm matching transformers

are not provided with the TV. They are

available at most electronic stores.

1V I_'k _,anel (l_tai_e_ V_)

ANT-A

_4_r _ ....................................... ,_

Figure I. Connecting separate UHF and VHF antennas.

Note: See page 5 for Outdoor Antenna Grounding

..................

Figure 2. Connecting twin lead antenna, coaxial lead

antenna, or wall outlet cable.

Note: See page 5 for Outdoor Antenna Grounding

For cable or antenna with coaxial lead (Figure 2)

[] Connect the incoming cable to ANT-A on

the TV back panel.

Cable Box

(Figure 3)

H H

,_y 1!/_ pt_el (O_talled V]_}

_ : LOOP

& IANT'A OUT ANT-B

[] Connect the incoming cable to ANT-A on

the TV back panel.

Connect two coaxial cables as follows:

[] One from LOOP-OUT on the TV back panel

to IN on the cable box back panel.

[] One from OUT on the cable box back panel

to ANT-B on the TV back panel.

Figure 3. Connecting the cable box.

Note: See page 5 for Outdoor Antenna Grounding