Operating instructions

Troubleshooting
Problem Possible Solution For More Information
• The remote control doesn't • Check that the batteries are • See Getting Ready to Use
work. installed correctly, the Remote Control in
Chapter 1 for an explanation
of how to install batteries in
the remote control.
• Check that the select switch
is set to "TV'.
See Remote Control Buttons
and Functions in Chapter 1,
which explains where the
select switch is located.
Be sure that you are
pointing the tip of the
remote control toward the
TV from a distance of no
more than 20 feet.
See Getting Ready to Use
the Remote Control in
Chapter 1, which contains
pointers for using the remote
control.
• The TV takes several
seconds to respond to
channel commands.
Use the ENTER/EXCH
button to avoid delays.
Enter 3 digits for channel.
• See Changing Channels in
Chapter 3, which explains
the function of the ENTER/
EXCH button.
• You can't access a channel
from Channel up/down.
• Be sure that the channel
you want to view is pro-
grammed into memory.
See Memorizing Channels in
Chapter 3, which explains
how to program channels
into the TV's memory.
Check that the TV is tuned
to the correct input source
(antenna) for that channel.
• See Selecting the Input
Source in Chapter 3, which
explains how to change the
input source.
• On-screen displays appear
each time you adjust a
function.
• This is part of the normal
operation of the TV.
• See Understanding Screen
Displaysin Chapter 4 for a
full explanation of the on-
screen displays.
• You can't program the TV to
turn on automatically.
• The TV may be locked.
• Time is not set
• See Using the Parental Lock
within Using the Advanced
Features in Chapter 3.
• See Setting the Clock in
Chapter 3.
94 Chapter 4: Troubleshooting