Operating instructions

Creating the AN Connection (Home Theater) (cont.)
Activc A/V Nctwork with a Mitsubishi VCR
The ActSve AiV Network is a system that Mitsubishi developed to make it
easier to operate many MJtsubishi products with one remote control. The
Active AiV network will automate the TV's input selection and the playback
of Mitsubishi VCRs into a single command.
You will gain even more benefits if you have a Mitsubishi VCR equipped for
the Active AAr Network, The Active AiV Network allows you to perform
many of the commonly used features of your system at the press of just one
button, as explained below,
before you begin, bc sure you have:
* Connected an A_r Network cable from the Active AiV Network
terminal of your TV to the "AiV Network IN" terminal of your
VCR.
* Connected your VCR to INPUT-1 of your TV.
* Set your TV AiV Network setting to Active or Basic.
* Set your VCR's remote control settings to VCR.
* Turned your VCR video mute setting on,
If you have installed TV GUIDE Plus on your TV, you can use the VCR
Plus i feature to control your VCR for recording,
what the Active AN Network does
The ActSve AiV Network makes it easier and faster to use the VCR Play
command or display your VCR's menu. _%qaen using the Active AiV Network,
you should always point your remote control at your television.
38 Chapter 2: Operating Your TV