Operating instructions

Changing channels
Your TV offers you six ways to change channels once their numbers have
been programmed into channel memo_-:
1) selecting channels one-by-one with the CHANNEL up (A) and
CHANNEL down (W) controls
2) directly accessing a channel by pressing the number keys
3) using the Recall option to return to the previous channel
4) using the SuperQaickView TM function to scan through any of nine
special user-chosen lists.
5) using the ADJUST (AV) keys in TV GUIDE Plusl SURF screens
6) using DTV Channel Guide (when available)
l>Important: To change channels faster, use either of the following procedures:
• Enter three digits for eve_- channel number, using zeros where
needed. For example, enter 004 to view channel 4 and 028 to
view channel 28, or
• Press the ENTER button after selecting the number of the
channel. For example, press 4, then press ENTER (in less than
three seconds) to view channel 4.
For DTV channds you will need to sdect a major and minor
channel. For example, enter 04 (m_ior), press CANCEL/SUB (a
dot will appear after the first numbers) then 11 (minor). It will
appear as: 04.11. If you press ENTERiEXCH after selecting only
the m_ior channel, you will see the first available minor channel.
If only one or two keys are used to select the ANT A or ANT B
channel number, the onscreen display will appear and remain
visible for three seconds if no more keys are entered. The TV
will then tune to the selected channel.
• If you have local cable channels that TV GUIDE Plus i does not
list, you can still select these channels by using the number keys
and enter them into one of the the SuperQuickView lists.
34 Chapter 2: Operating Your TV