Manual

Remote Control Functions: Operation of PIP and POP
MAIN
PICTURE Side-by-Side
Figure 1
MAIN
PICTURE
PI
P2
P3
Figure 2
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP
picture source device. A menu similar to the Device
Selection menu will be displayed.
Changing PIP/Side-by-Side
Channels
Press PIP CH to scroll up and down through
memorized channels on Ant-A and Ant-B.
Exchanging Program Images
Press EXCH to exchange the main picture and the
PIP/POP picture.
Moving PIP Image
If no menus are on the screen, press ADJUST • •
• • to move the PIP display anywhere on the main
screen.
PI P2 P3
MAIN
PICTURE P4 P5 P6
P7 P8 P9
Figure 3
Ant-A 002 KCBS PIP A 017
Standard
Stereo SAP
TV-PG DLSV
SQV1
Figure 4
Automatic POP Switching
When automatic POP switching is active, the TV
will cycle through memorized channels on Ant-A or
Ant-B or strobe pictures from other A/V components
in the POP display. Press PAUSE to pause or
restart automatic POP switching.
Selecting POP "Live" Image
Press ADJUST • • • • to select a different POP
"live" image (automatic POP switching must be
paused.)
Freeze the PIP and Side-By-Side
Picture
Press PAUSE to freeze the PIP and side-by-side
images. Press PAUSE again to return to a "live"
image.
IMPORTANT
;ide cannot show the same channel or device on both sides.
is not available as the PIP or Side-by-Side while ANT-A is the main image.
)P is compatible with 480i signals. PIP/POP is not compatible with 480p, 1O8Oisignals or
gnals from ANT-DTV, IEEE 1394 devices or VGA input.
63