Specifications

MODELS: WT-46807 / WS-55807 / WS-55857 / WS-55907 /WS-65807 / WS-65857 / WS-65907 / WS-73907
Page 40
Purpose:
Measuring
Instrument
Test Point
Measuring
Range
Input Signal
Ext. Trigger
Input Terminal
Symptom:
-----
------
------
-----
Video & DTV Inputs
To preset data controlling raster geometry
Raster distortion.
Note:
This procedure is usually only necessary if:
An E2PROM is replaced in the Control or Convergence circuits.
E2RESET or Convergence Reset has been activated.
Procedure
In the Circuit Adjustment and Coarse Convergence Modes set the data to the values
given in the Tables below in both the NTSC (SD) and 1080i (HD) modes.
Note:
If a HD signal is not available, use the Conv. HD With No Signal
procedure discribed in detail on page 26, Convergence Adjustment Mode.
[Conv/Defl]
18. Geometry Preset
CIRCUIT ADJUST MODE
Activate …….. MENU-8-2-5-7
Function ...……..AUDIO
Item No. ……….…….VIDEO
Adjust Data .…….ADJUST
Save Data . ………ENTER
Exit …………..MENU (twice)
CONVERGENCE MODE
Activate ……..MENU-8-2-5-9
Misc. ……………….……"6"
Coarse……………..."5"
Fine ……………………..."4"
Color (R,G or B)……AUDIO
Item No…………...VIDEO
Ad
j
ust/Move……….ADJUST
Cursor To
gg
le...ENTER
Save & Exit..MENU (twice)
NTSC & HD 1080i
DEFL JUNGLE (MENU-8-2-5-7)
Item # Abbrev.
NTSC HD NTSC HD NTSC HD
1 HWID443833335747
2 HKEY253031313131
3EWPT253131263126
5EWPB202720262026
7VHGT312138313831
8VLIN009999
9VSCN770000
20VPOS63 0 31313131
46" Data 55/65" Data 73" Data
CONV GREEN
(MENU-8-2-5-9)
Item # Abbrev.
46" 55-65" 73"
0 HSTA -35/-35 -35/-35 -35/-35
1 SPCC 0/0 0/0 0/0
2 HWID 0/0 0/0 0/+30
3 SKEW 0/0 0/0 0/0
4 VSTA -35/-35 -35/-35 -35/-35
5 VKEY 0/0 0/0 0/-10
6 TBPC -220/-200 -220/-200 -220/-200
7 TILT 0/0 0/0 0/0
CONV RED
(MENU-8-2-5-9)
Item # Abbrev.
46" 55-65" 73"
0 HSTA +75/+75 +40/+50 +40/+50
1 HLIN -225/-210 -210/-200 -210/-200
2 SKEW +5/+5 +10/+10 +10/+10
3 HWID +15/+20 -25/-5 -25/-5
4 HSBW +30/+30 +30/+30 +30/+30
5 VSTA -20/-20 -20/-20 -20/-20
6 VKEY -115/-85 -100/-85 -100/-85
7 TILT 0/0 0/0 0/0
CONV BLUE
(MENU-8-2-5-9)
Item # Abbrev.
46" 55-65" 73"
0 HSTA -75/-75 -40/-40 -40/-40
1 HLIN +240/+215 +240/+220 +240/+220
2 SKEW 0/0 -10/-10 -10/-10
3 HWID -15/-20 -20/-5 -20/-5
4 HSBW -45/-45 -45/-45 -45/-45
5 VSTA -5/-5 -10/-10 -10/-10
6 VKEY +115/+105 +115/+115 +115/+115
7 TILT 0/0 0/0 0/0
Data (SD/HD)
Data (SD/HD)
Data (SD/HD)
CONV. HD WITH NO SIGNAL
1. MENU-8-2-7-0
2. Set DTV Port to 1080i
3. MENU (twice)
4. INPUT select DTV Inputs
5. MENU-8-2-5-9
After adjusting, set the
DTV Port to AUTO