Manual

Part IV: Operation
Remote Control Functions: Care and Operation
rT T'
dttb
REW_£V play FF/FWD
m_ MITSUBISHI
Figure 1. The remote control functions.
i" !
Figure 2. Instalfing the batteries.
size AAA
batteries
Operation
Installing the Batteries:
(Figure 2)
[] Remove the remote control's back cover
by gently pressing the ridged tab in the
direction of the arrow and sliding off the
cover.
[] Load the batteries, making sure the
polarities (+) and (-) are correct.
For Best Results from the Remote Con-
trol:
[] Be within 20 feet of the equipment.
[] Do not press two or more buttons at the
same time unless instructed to.
[] Do not allow to get wet or become
heated.
[] Avoid dropping on hard surfaces.
[] Do not use harsh chemicals to clean.
Use only a soft, lightly moistened cloth.
[] Do not mix new and old batteries.
[] Do not heat, take apart, or throw batter-
ies into fire.
[] Use only AAA batteries.
Operating the Remote Control:
You can use the remote to control the TV,
CABLE/DBS/DTV, VCR, DVD, and AUDIO
products. Select the product you want to
control by moving the slide switch ([] of
figure 1) to the appropriate position. The
remote control has been preset to operate
the TV and other Mitsubishi products. To
program the remote control to operate other
products, see Use of the Remote Control
with Other A/V Products, pages 26-27.