Manual

Part I1: Installation
WARNING:
Connecting a DVD Player
DVD back p_r_l
ili!i!_ iiii_'i
U
Figure 1. Connecting the DVD playe_
U
Connecting a S-Video Device
DVD Player with Component Video
(Figure 1)
[] Connect the Component Video cables
from Y/Cr/Cb or Y/Pr/Pb VIDEO OUT
on the back of the DVD player to COM-
PONENT-1 or COMPONENT-2 on the
TV back panel, matching the correct
components:
[] YtoY
[] CrorPrtoPr
[] CborPbtoPb
[] Connect a set of audio cables from
AUDIO OUT on the back of the DVD
player to COMPONENT AUDIO Input 1
or 2 on the TV back panel. The red
cable [] connects to the R (right) chan-
nel, and the white cable [] connects to
the L (left) channel.
TVb_ckp_ne_
Figure 2. Connecting any S-Video Device.
Other S-Video Device
(Figure 2)
[]
Connect a S-Video cable from VIDEO
OUT on the device back panel to VIDEO
INPUT-l, INPUT-2, or INPUT-3 on the
TV back panel.
[]
Connect a set of audio cables from
AUDIO OUT on the device back panel
to AUDIO INPUT-1 or INPUT-2 on the
TV back panel. The red cable connects
to the R (right) channel and the white
cable connects to the L (left) channel. If
your DVD is mono (non-stereo), connect
only the white (left) cable.