Service manual

Page 4
V25 / V27 Chassis Down to 1
CABINET DISASSEMBLY (REAR VIEW)
Typical Procedure - Disassembly will vary by model.
For exact procedures by model, refer to the Service Manual.
Rear Cabinet Disassembly
1. Remove the Back Board by removing screws (a), and screws (b).
2. Remove screws (c) to remove the Board Slide.
3. Remove screws (d) to remove the Board Shelves.
4. Remove screw (e) holding the chassis.
5. Remove 4 screws (f) securing the Light Box Assembly.
6. Be certain that all cables and connectors between the Light Box Assembly and external items are
disconnected (e.g. speaker plugs, etc.), including the USB and 1394 connectors.
7. Slide the Light Box Assembly from the cabinet.