Service manual

Page 3
V25 / V27 Chassis Down to 1
CABINET DISASSEMBLY (FRONT VIEW)
Typical Procedure - Disassembly will vary by model.
For exact procedures by model, refer to the Service Manual.
Front Cabinet Disassembly
1. Remove the Speaker Grille by pulling forward.
2. Remove the Board Front by removing screws (a).
3. Remove 4 screws (b) holding the Screen Assembly (all models).
4. Remove screws (c) from the Screen Assembly (65 & 73 inch models only)
5. Unplug the CC, ZF and GR connectors from the Control Panel.
6. Lift the Screen Assembly up and away from the cabinet.