User manual

8 03/2013-00

KNX | InSideControl App/HD App

InSideControl App / HD App

Setting up InSideControl

The following steps are required to set up InSideControl:

• Installing App/HD App on portable devices

• Transferring the conguration le to portable devices

• Connecting portable devices to the IP gateway

Installing App/HDApp on portable devices

Download InSideControl App or InSideControl HD App from the Apple Store and install the

App.

Download InSideControl App or InSideControl HD App from the Google Play Store and

install the App.

You can start the App/HD App and use it in Demo Mode without a connection to an IP gate-

way. The features of the Demo Mode are outlined in the chapter Settings --> 29.

Transferring the configuration file to portable de-

vices

The conguration consists of a le with the extension .knx and contains the options for your

KNX installation. Without a conguration le, you cannot control any elements of your KNX

installation.

The conguration le is provided by your system integrator.

Portable devices with the iOS operating system

Files can only be copied onto Apple portable devices using the iTunes program. iTunes must

be installed on a PC or Mac. iTunes is available to download free of charge at http://www.

apple.com/de/itunes/.

Transferring the conguration le

1 Connect your portable device to

your computer.

2 Start iTunes.

3 Select the portable device A

onto which the le is to be trans-

ferred.

4 Click on Apps B .