User manual
24 03/2013-00
KNX | InSideControl App/HD App
InSideControl App / HD App
Meaning of the symbols
Blinds from Gradhermetic
If you control blinds from Gradhermetic, you can call up the functions Up, Down and Stop.
A Down: Lower the blinds. Close the slats. Activate Up-Down operating mode
B Stop: Stop the blinds. Activate Tilt mode
C Up: Raise the blinds. Open the slats. Activate Up-Down operating mode
Lowering/raising the blinds
1 Press Down or Up to activate the Up-Down operating mode.
2 Tap on Down or Up to lower or raise the blind to the end position.
Opening/closing the slats
1 Press Stop to activate the Tilt operating mode.
2 Tap on Down or Up to close or open the slats.
If the vibration function is switched on, your portable device vibrates to conrm the activation.
Scenes
This symbol represents a scene. A scene puts one or multiple devices into a pre-set state
at the same time (e.g., switch on lamps, move blinds to half height). Scenes can only be
activated.
1 Press the scene symbol.
If the vibration function is switched on, your portable device vibrates to conrm the activation.