User manual

2303/2013-00
InSideControl App/HD App | KNX
InSideControl App / HD App
Meaning of the symbols
Sliders
This device symbol represents a device for which values can be dened directly within a
specic range.
1 Move the slider to the desired value.
Blind/roller shutter
This device symbol represents a blind or roller shutter. The device symbol and function are
adapted to the devices actually in use.
Moving the blind/roller shutter
With the exception of specic brands, all blinds in a KNX installation have the functions Up,
Down and Stop/Step.
A Down: Tap on Down to lower the blind to the end position.
B Stop/Step: Tap on Stop/Step to stop the blind or to move it in steps.
A Up: Tap on Up to raise the blind to the end position.
The precise function of the blind control depends on your specic KNX installation. Contact
your KNX system integrator for a detailed description of your control.
Blind/roller shutter with positionings
If there are sliders under the device symbol, the blind supports additional functions.
A Height position: Move the slider to the desired position to directly specify the height
position of the blind.
B Slat position: Move the slider to the desired position to directly specify the vane
opening.
Right = open slats, left = close slats.