User manual
18 03/2013-00
KNX | InSideControl App/HD App
InSideControl App / HD App
Meaning of the symbols
Meaning of the symbols
There are two symbol types in InSideControl: room symbols and device symbols. The follow-
ing tables provide an overview of the symbols and their functions.
If InSideControl is not connected to an IP gateway, all room and device symbols are in "Of-
ine Mode". The symbols are shown in grey and do not react to inputs.
Room symbols
A room is a group of dierent devices (e.g., lamps, blinds, warning notications), which are
congured by your system integrator in accordance with your specications. These devices
do not necessarily have to been in the same room.
The status of the room symbol provides certain information. The following table provides an
overview of the room symbol statuses along with their meaning:
Meaning Connected to IP gateway Not connected to IP gateway
Room not selected
Room selected
At least one light in the room is
switched on.
The colours shown correspond to the standard colour scheme. The status colours may vary
with the colour scheme. More information on the colour schemes is available in the chapter
Settings --> 29.