User manual

12 03/2013-00
KNX | InSideControl App/HD App
InSideControl App / HD App
Setting up InSideControl
Establishing a manual connection
If multiple IP gateways are present in your KNX installation or if a xed IP address is assigned
to the IP gateway, the connection should be established manually.
1 Open Settings (see Settings --> 29).
2 Deactivate the Demo mode option.
3 Deactivate the Autodiscover option.
4 Enter the IP Address.
5 Enter the Port.
6 End the App and then restart the App.
Autodiscover
Enable this option to automatically dis-
cover your IP gateway IP adress.
IP address
Current IP: xxx.xxx.xx.xx
Port
Current port: 3671
Demo mode
Enable this option to use the demo
mode of the application.
Consult your operating system manual for information on how to completely end an applica-
tion.