Manual

BasicSetu and tion
Please take a moment to review the following list of
items to ensure that you have received everything.
1. Remote Control
2. Two AA Batteries
3. Basic Owner's Guide
4. HDTV Quick-Setup Guide
5. Product Registration Card
3.
Review the important safety, installation, and oper-
ating information at the beginning of this book.
Choose a location for your TV.
• Allow at least four inches of space on all sides
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV
as well as shortened lamp life.
Avoid locations where light may reflect off the
screen.
See the stand requirements on page 2.
3. Install the batteries inthe remote control.
4. Plug the TV into an AC power outlet.
Remote Control Batteries
1. Remove the remote control back cover.
2. Load the batteries, making sure the polarities
(+) and (-) are correct. Insert the negative (-)
end first.
3. Slide the cover back into place.
3.
3_
4_
Confirm that the remote
control is in TV mode.
Press the side button
once to light the mode
indicator and confirm
that "iV mode is active.
To change, press the
side button additional
times to activate TV
mode.
Aim the remote control
at the TV and press the
POWERkey (_. Wait for the
Welcome screen.
Press V ifyou wish to
change the menu language
to Espa_oI.
Press _ to highlight EXIT.
Press ENTERto clear the
menu.
O ® t=_