Manual

NetCo rnandI A/V
Receiver
Controlofa
Several types of A/V receiver control can be set up
using the Inputs > AVR menu.
• Power and volume. Seethe next page.
• Audio switching. For most equipment setups, see
"Case 1: Automatic A/V Receiver Switching to the
TV Audio Input" page 53.
• Audio switching and surround sound. To set up
switching to a surround sound device, see "Case
2: Automatic A/V Receiver Switching to a Surround
Sound Device" page 54
• Audio and video switching over NDMI. If your
A/V receiver has an HDMI output, it may be con-
venient to send audio and video to the TV over a
single HDMI cable through the A/V receiver. See
"Case 3: Automatic Audio and Video Switching via
HDMI," page 54.
Note: To set up control of other device types, see
"Initial NetCommand Setup," page 47.
Switching Audio to and from the A/V
Receiver
1, Press MOREand then 9(AUDIO).
Press A to show the Speakers option.
3, Press I_ to select either AV Receiver or TV.
Controlling A/V Receiver Power
With Any Connection Type
1, Press MOREand then 9(AUDIO).
Press A V to show the Speakers option.
3, Press i_ to select AV Receiver.
4, Point the remote control at the TV (not the A/V
receiver) and press POWERto power the A/V
receiver on or off.
With an HDMI Connection
1, Press ACTIVITY.
Highlight the A/V receiver icon.
3, Press POWER.
Controlling Other A/V Receiver Functions
With the A/V receiver powered on and selected, the
TV's remote control operates the volume and mute
functions. Also, when you switch to a device in the
Activity menu, the A/V receiver automatically switches
to the correct audio input for the device.