Operation Manual
14 1. Basic Setup and Operation
For assistance call 1(800) 332-2119
Selecting an Input to Watch
1.
Press
INPUT
.
2.
Press and to highlight an input icon.
Sample Input selection menu, DVD input selected
3.
Press
ENTER
to switch to the input.
4.
To control the input device, use the device’s remote
control or see “Introduction to Home-Theater
Control,” page 48.
Note: In most cases, to see a named icon for a con-
nected device (as in the samples), you must first
assign a name either
• Whenthedeviceisfirstconnectedandthe
New Device Found menu offers a choice
of names.
• ByusingtheInputs > Name menu to
assign or change a name at any time after
the TV has detected the connection.
More About the Input Selection Menu
• Toassignhelpfulnamestotheicons,seethe
Inputs > Name menu, page 59.
• ToremoveunwantedAntenna,Bluetooth
®
, or HDMI
device icons from the Input Selection menu, see
the Inputs > Name menu, page 59.
• Torearrangetheicons,seetheInputs > Order
menu, page 60.
Basic TV Operation
Watching Broadcast TV
TV Connected to an Antenna or Direct Cable
Service (no cable box)
Note: Perform channel memorization to enable recep-
tion of digital channels. See page 12.
1.
Press
INPUT
to display the Input Selection menu.
2.
Highlight the antenna or cable icon and press
ENTER
.
Sample Input Selection menu, antenna input selected
3.
To tune to a channel from the
ANT
input, use any of
these methods.
• Enter the channel number using the number
keys on the remote control and press
ENTER
.
For a two-part digital channel, such as 3-1,
press
3
—
CANCEL
1 ENTER
.
• Press
CH
to change channels one channel at a
time.
• Press and hold
CH
to speed through channels.
• Press
LAST
to return to the previous channel.
• Use the Fav (Favorites) feature to tune to up to
nine favorite channels. See page 28.
• Press
GUIDE
to display ChannelView channel
listings, highlight a channel number, and press
ENTER
to tune.
• Set up ChannelView custom channel banks
and use the
CH
key to tune to predefined
groups of channels. See page 29.