Specifications
74
75
V-Chip Lock Menu, continued
Using the Passcode from the V-Chip 
Lock Menu
When a channel or the TV is locked, figure 23 will 
display. To view a V-Chip blocked program or to watch 
the program during a scheduled lock time, you must 
enter your 4-digit passcode or change to an unlocked 
channel or allowed program. Once you have entered 
the passcode, the V-Chip Lock or Lock by Time will 
remain released until the TV is powered Off and then 
On again.
  
       
 
      
   
      
Figure 23. V-Chip Passcode screen
Using the V-Chip from the Remote 
Control
Figure 24
You will see the screen shown below when you first 
press V-CHIP on the remote control. To quickly turn 
on or off the V-Chip Lock, input a four-digit passcode 
with the number buttons on the remote control, then 
press ENTER. To change any V-Chip settings, you 
must use the V-Chip Lock Menu.
  
    
      
   
      
Figure 24. V-Chip Entry screen from Remote Control
Using V-Chip with Program Ratings
Figure 22
You can choose the program ratings that you want 
to allow during specific times of the day by using the 
ADJUST buttons to highlight V-Chip from the V-Chip 
Lock menu and press ENTER. When you select V-
Chip the screen in Figure 22 will display. 
Press ADJUST   or   to select On or Off. If you 
selected On then press ADJUST   to move to the TV 
Rating box. Press ADJUST   or   to select the TV 
Rating level you want to allow. Press ADJUST   to 
move to the TV Content Categories and press ADJUST 
 or   to select. Press ENTER to add a check mark 
to the TV Content Categories you want to block.
Press ADJUST   to move to the Programs Not rated 
box and press ADJUST   or   to select a program. 
Press ENTER to add a check mark to programs that 
are not allowed. 
NOTE: If you select to block programs that carry the V-
Chip rating Programs Not rated, you may block News 
or Emergency Bulletins, when “None” or “NR” Not 
Rated V-Chip rating is included. Care should be used 
when blocking programming that is not rated. 
Press ADJUST   to move to the Movie Rating box. 
Press ADJUST   or   to select the Movie Rating 
level you want to allow. See the next page for detailed 
information on rating guidelines. 
To set the times when these guidelines will be active, 
press ADJUST   or   to slowly select the time, 
starting with the hours. Press and hold ADJUST   
or   to quickly select the hours, press ADJUST   to 
select the minutes.
By setting the V-Chip Start Time and V-Chip Stop 
Time to the same time, the V-Chip will be active 24 
hours a day.
Figure 22. V-Chip Menu 










