User manual

EN-9
4. Projector registration
4.1. Connection
Connect the controller PC and the projector, which have installed “ProjectorView Global+”, to a commercially
available LAN cable or wireless LAN adapter.
When connecting multiple projectors, use a commercially available hub.
• ALANterminalor802.11b/g/nwirelessLANadapterisrequiredforthecontrollerPC.
• UseaLANcablecompatiblewithCategory5and100BASE-T.
Both crossover and straight-through cables can be used.
 (Inthecaseofconnectionexamples5and6,seetheinstructionmanualoftherouter.)
• DonottouchmetalpartsoftheLANterminalandLANcablebyhandschargedofstaticelectricity.Discharge
of static electricity may cause a failure of the projector.
• Upto200unitsoftheprojectorscanberegisteredatthemaximum.
<Note>
• TheLANfunctionmaybeunavailabledependingonthestandbymodesettingoftheprojector.Toenablethe
LAN function, change the setting referring to the User Manual of your projector.
• SomeUSBwirelessadapterscannotbeusedforyourprojectordependingonthespecications.
Connection example 1
Controller PC
Projector
Commercially available LAN cable
Projector
Projector
Connection example 2
Controller PC
Connection example 3
Controller PC
Externalhub
Commercially available LAN cable