Setup guide

APPENDIX
Procedure for Bypassing the Paren-tal Lock
Cut along dotted line and file after reading.
After you set the lock, you will need the sec:cel; code in order to:
• view a locked channel,
• view the locked TV, or
• cancel the lock.
If you forget the code, you can view the locked. TV without entering
the code. To do this, simply press the buttons on your remote
labeled "QV" and "9" at the same time whenever your secret code is
requested.
_>Important: Unlocking with this procedure is only temporary. To cancel the lock
completely, follow the procedure below:
O Turn on your Projection TV. If the TV requests your secret
code, press the "QV" button and the "9" button on the remote
control at the same time.
O Press the MENU button to view the mai_ menu. Use the
ADJUST buttons to select "Advanced Feotures." Press ENTER.
Use the ADJUST buttons to select "Use Parental Lock." Press
ENTER.
Press the "QV" button and the "9" button on the remote control
at the same time, instead of entering the code.
If you were using "lock by time," press the CANCEL button to
turn off the lock.
If you were using "lock by channel," use the ADJUST buttons to
place the cursor next to the channel whose lock you want to
turn off. Press ENTER.
Press the CANCEL button to unlock that channel, or use the
ADJUST buttons to change the channel to a new one.
Press the MENU button to return to the "Advanced Features"
menu.
_>Important: You must use the remote control included wiLh this Projection
TV. You cannot use a remote control from another Mitsubishi
component, and you cannot use any "Univer_ al" remotes from
other manufacturers.
85