Setup guide

Overview of the Control Panel (cont,.)
_Important:
@
adjust buttons (ADJUST A T)
After selecting an audio or video function, use these buttons to
adjust it. These buttons can be used to:
- increase or decrease the function (e.g., color),
- shift from one end of a scale to the other (e.g., balance), or
- change a setting (e.g., stereo).
Also use these buttons to select items from the on-screen menu.
These buttons cannot be used to adjust audio/video settings when
you subscribe to StarSight. If you subscribe to StarSight, use the
left/right buttons on the remote to adjust audioA_ideo settings.
@ audio and video controls (AUDIO, VIDEO)
Use these buttons to select audio and video ihnctions thai; you
want to adjust. To select an audio or video function, repeatedly
press the AUDIO button or VIDEO button, lifter you have
selected a function, use the ADJUST buttons tc adjust it.
audio function button (AUDIO "- ) .... Use to select one
of the following audio functions:
stereo/SAP/mono,
bass,
treble,
balance,
surround off/simulate/hall,
speaker internal/internal center channel!external, or
monitor out variable/fixed.
video function button (VIDEO -41) --- Use to select one of
the following video functions:
tint,
color,
contrast,
brightness,
sharpness,
color temperature high/middle/low, or
closed captioning.
@ timer reset button (TIMER RESET)
Use this button to reset the clock time and to erase any timer
settings. The Projection TV will turn off when you press this
button.
test buttons
The ENTER, ADJUST, AUDIO, and VIDEO buttons can be
used to test and adjust the alignment of you:r Projection TV's
picture tubes. See page 34 for more information.
4 Chapter 1: Getting to Know Your TV