Setup guide

Using the Replay feature
[] USE ADVANCED PIP
O Current setting
:Replay
Three images of
previous scenes will
be shown on the screen after the PAUSE
button is pressed. Timing between
images can be controlled by adjusting
speed. This feature is available on
Antenna A (Ant-A) and External Inputs.
Use these buttons on the remote:
I--_-IADJUST[] ENTER[_ MENUto
to select to enter go back
[] USE ADVANCED PIP
[] Current setting
: Replay
O Replay Speed
• 1
Three images of
revious scenes will
e shown on the screen after the PAUSE
button is pressed. Timing between
images can be controlledby adjusting
speed. This feature is available on
Antenna A (Ant-A) and External Inputs.
Use these buttons on the remote:
F-_--]ADJUST [] ENTER [_.MENUto
to select to enter go back
O
O
O
O
Select "Use Advanced PIP" in
the Advanced Features menu
and set it to "Replay." (See
"Selecting an advanced PIP
function," page 58.)
Set the replay speed between 1
(short inte::val) and 9 (hmg
interval).
Use the MENU button to return
to the normal picture.
Press the PAUSE button. The
TV will memorize six frames of
video from the main image and
display the first three of these
frames as PIP images. (The
interval between the frames is
determined by the replay speed
set in step _.)
000_
o000 D
oO00U
_0o_
[]
[]
[]
Each time you press the:
PAUSE buLton, the mernorized
frames will shift upwards.
To cancel the PIP images, press
the PIP button.
*al - a6 : memorized frames
PAUSE PAUSE
[] ,',.-I_] .,.-_
[] [] []
PAUSE PAUSE PAUSE
0 [] 0 [] O
[] [] [_
74
Chapter 3: Using the Special Features
_>Important:
the TV will automatically turn. off.
If you turn the TV off while it :is set to Input-1, it will return to its