Setup guide

[:>Important:
E>Important:
[] SET SUPERQLIICKVIEW
Ant. Channel Ant. Channel
[] ........ [] ........
Use these buttons on the remote:
-] DJUST to [_ CANCEL to cancel
select an input
[] ENTER to enter _ MENU to go back
QV
O Use the ADJUST buttons to
select an a:atenna (_at-A or
Ant-B). Press ENTER.
You can clear the antenna by
pressing CANCEL.
[] SET SUPERQUICKVIEW
Ant. Channel Ant. Channel
O Ant-A 001 r_ ........
[] ........ [] ........
Use these buttons on the remote:
[_ DJUST to I-_ CANCEL to cancel
select a channel
[] ENTER to enter [_ MENU to go back
O Use the ADJUST buttons,
CHANNEL buttons or number
buttons to add a channel to the
list; press ENTER. You can
clear a ch_.nnel by pressing the
CANCEL button.
0 Repeat steps 0, 0, and 0 to
customi[ze the Super Quick
View mere ory.
O Press the :MENU button to exit
this menu.
adding channels to the list with the remote control
O Use the channel controls or number buttons to tune the TV to
the channel you want to add to the list..
0
Press and hold the SQV button for aboat 2 seconds. When you
release the button, the letters "SQV" will appear under the
channel number, indicating that the channel has been added to
Super Quick View memory.
If the Super Quick View memory is full, the letters "SQV" will flash
when you release the SQV button.
Once you've added a channel to the SQV memory, the letters "SQV"
appear under the channel number any time t:he channel number is
displayed, even if you tune 1;othe channel in another manner.
Using the Advanced Features 55