Setup guide

Using the closed caption decoder
E>Important:
L>Important:
E>Important:
Many broadcasters now supply closed captioning information along
with their regular broadcasts. Your TV can decode that information
and display it on the TV screen.
There are two types of captioning that broadcasters can send:
"standard" and "text."
Standard captioning is related to the program that is being'
shown. Standard captioning usually follows the dial ogue of the
characters on-screen.
Text captioning often contains information such as weather or
news. Text captioning blocks out your view of the program you are
watching.
Your TV can decode four different "standard captioning" signals
and four different "text captioning" signals from ,each TV station.
However, each station may be broadcasting only one or two
captioning signals, or none at all.
When setting the decoder you can choose:
• to display one of four "standard captioning" signals ( _0] :1,
D :2, [0_]:3, _ :4),
• to display one of four "text captioning" signals ( _ : Text 1, C_ :
Text 2, _¢7 : Text 3, _ : Text 4),
• to display captions when muting ( _ : When Muting),
• or to turn the captions off ( [] ::Off).
If you select "_-07: When Muting," the standard captioning signal
( [] :1) will appear whenever you use the MUTE button.
If you set the decoder to a "standard" caption setting and tune, to a
broadcaster that is not sending a caption signal, :no captions will
appear.
If you set the decoder to a "text" setting and tune to a broadcaster'
that is not sending a text signal, a large black rectangle will block:
your screen.
The content of captions are determined by the broadcaster. If your
captions show strange characters, misspellings, or odd grammar, it
is not a malfunction of the Projection TV.
46 Chapter 2: Operating Your Projection TV