Setup guide

@ cx:_ c
oooC
TS-5087,
VS-6085, VS-7085,
VS-6087, VS-7087, VS-8087
adjusting the video filnctions
When adjustiag the video
functions, you can use the buttons
on the remotE, control or on the
control panel.
{[]_Press the _?IDEO button
repeatedly until the function
you want to adjust appears
on-screen.
(The functions appear at the
center of the bottom of the
screen.)
O While tlhe function i,; still on the
screen, use the ADJUST
buttons to adjust the function's
setting.
The functions will disappear
from the screen after a ihw
seconds. (You cannot adjust a
function if it is not on the
screen.)
_>Important: If you subscribe to StarSight, you can only use the "left/right"
buttons on the remote control to adjust the vi_eo functions. You
cannot use the up/down buttons on the remote control or the
ADJUST buttons on the front panel of your projection q_V.
Getting Started 45