Setup guide

I?
Renaming the inputs
This feature allows you to rename the inputs so that you can keep
track of components you have connected to your TV. For example,
you might name one input '_CR," and another one "DISC." After
renaming, the new name will appear on the screen display. (The
original names are "Input-l," "Input-2," and "Input-3.")
[] CUSTOMIZE DISPLAY
[] Select Menu Type
[] Rename the Input
[] Name the Channels
[] Lock AN Functions
Use these buttons on the remote:
[]ADJUST ENTER r_ MENU toro]
to selec! -- to enter go back
[] RENAME THE INPLIT
Current settings:
O Input-1 .....
[] Input-2
Input-3 .....
Use these buttons on the remote:
[_ DJUST to _ CANCEL to cancel
select an input
[] ENTER to enter [_ MENU to go back
[] RENAME THE INPUT
Current settings:
O Input-1 ABCD-
[] Input-2 .....
Input-3 .....
Use these buttons on the remote:
-_-----] DJUST to r_ CANCEL to cancel
select an input
[] ENTER to enter _ MENU to go back
O Press the MENU button on the
remote control. The Main Menu
will appear on. the screen.
O Use the ADJUST buttons to
select "Customize Display."
Press ENTER.
You will see the Custorn.ize
Display screen. Use the AD-
JUST buttons to select "Re-
name the Input." Press ENTER.
Use the ADJUST buttons to
select the input you want to
rename (Input-I, Input-2, or
Input-3). Press ENTER..
Use the ADJUST buttons and
the ENTER button to select
each letter in the new name.
You can rename the inputs
using letters (A- Z), numbers
(0 - 9), or symbols (:/., ( ) _"
#$%&'*+;<=>?
blank - ).
If you press the CANCEL
button while setting the name,
you will mow_ one position to
the left. You can clear the
entire name by pressing
CANCEL when the left.-most
position is blinking.
When you are finished, press
the MENU button; the screen
will return to the Customize
Display menu.
38 Chapter 2: Operating Your Proiection TV