Setup guide

WhenanA/VNetworkcableis connectedbetweer,theProjection
TVandVCRandthefollowingconditionsaremet,yourProjection
TVhastwoadditionalfeatures.
If...
¢" You set up "StarSight," and
€" Your VCR is one of the following models: HS-U500, HS-U550,
HS-U650, HS-U770, HS-U510, HS-U560, or ES-U760, and
€" You have set "A/V Network" on your Projection TV and VCR to
"Active."
Then...
J The Projection TV will control your VCR to record current and
future programs.
€" You will not have to "set up" your VCR dining the StarSigbt
authorization procedure.
€"
An error message will be displayed when you record from the
"StarSight" screen if the VCR is:
• currently recording;
• playing a tape;
• turned off; or
• if a tape is not inserted :into the VCR
_Important:
_Important:
_Important:
Important:
If connected, the A/V Network will still pass remote control signals,
even when the Projection TV's A/V Network setting is "Off:"
If you have not connected the A/V Network, set "A/V Network" to
"Off," or there may be problems selecting channels on your TV.
If you are using a Mitsubishi VCR with A/V Network or Active A/V
Network, you should have connected it to the II_ PUT-1 of your TV.
If you subscribe to StarSight, the A/V Network ':Quick Play"
feature will not be available.
Getting Started 33