Setup guide

_Important:
_Important:
using your remote control to operate your Mitsubishi A/V
receiver
After you have set up your remote control for your A/V receiver, you
can use the remote to operate it.
O Use the select buttons across the top of the remote control to
choose the layer that you "set; up" _o operate yeur AN receiver:
TV or AUX.
O Point the remote control at the A/V receiver and press the
desired buttons.
If you are using a Mitsubishi HTS-100, you can use the POWER,
VOLUME, and MUTE buttons to operate the rece!ver.
If you are using a Mitsubishi HTS-300, you can use the POWER,
CHANNEL, INPUT, VOLUME, ENTER, number (0-9), DISPLAY,
MENU, CANCEL, AUDIO, VIDEO, ADJUST, and MUTE buttons
to operate the receiver.
notes about your remote control
Sometimes manufacturers will change their products, or they may
use more than one code. If this is the case, your remote may not be
able to operate your VCR or cable box.
When you replace the batteries in your remote control, the remote
will usually return to its initial setting. You may need to set up
your remote again.
Getting Started 19