Setup guide

Ifyourcablebox
is this brand...
ABC
Color Voice
Comtronics
Gemini
General Electric
General Instruments
Hamlin
HitacM
Jerrold
Macom
Magnavox
Memorex
...enterthis
code
57, 59, 62, 67, 89
73, 74, 98
93
55
66
55, 56, 57
52, 53, 69
57
54, 55, 56, 57, 58
59, 60, 85, 87
71
94
51
O While holding in the POWER button on the remote control,
enter the code number listed in the chart bellow for your brand
of cable box. Be sure to enter both digits of the code number. If
more than one number is listed try the first one.
If yourcablebox
isthis brand...
Oak
Panasonic
Paragon
Philips
Pioneer
Prime Star
Pulsar
RCA
RCA DSS
Regal
Regency
...enterthis
code
61, 62, 82
63, 70
51
73, 74, 75, 76, 77, 93
94, 95, 96, 97, 98, 99
64, 65, 84
48
51
63
49
53
79
If your cablebo_
is this brand...
Scientific Atlanl
Samsunq____
Si_]nature
_ruoar
Starcom
Star gate
Tocom
Toshiba
Untied Artists
United Cable
Viewstar
Zenith
...enter this
code
66, 86, 88, 89, 91, 92
65, 84
57
63
54, 55, 56, 87
55
67, 68, 72
51
62
54
93, 94
51
O Release the POWER button.
O
Press the POWER button again. Your cable box should turn off.
If the cable box turns off, your remote control is now set I;o
operate your cable box. If your cable box does not turn off,
repeat the instructions above, trying each code number listed
for your brand of cable box. If none of these numbers work, try
each number, 51 through 99.
,%Important: After setting up your remote, be sure that your cable box can be
turned on with the POWER button. Some of the cable boxes can be
turned on with the CHANNEL buttons or the number buttons.
using your remote control to operate your cable box
After you have set up your remote control for your particular brand
of cable box, you can use the remote to operate your cable box.
O Use the select buttons across the top of the remote control to
choose the layer that you "set; up" to operate, your cable box:
AUX or VCR-B.
Point the remote control at the cable box and press the desired
buttons.
You can use the POWER, CHANNEL, numbers (0-9), and ENTLR
buttons to operate your cable box. If you are using an RCA DSS or
Prime Star converter, you may be able to use additional buttons.
Getting Started 17