Operation Manual

SIM phonebook

• Directly from the standby display,

• Using the menu,

• From other stored locations,

Numbers stored in the last dialled, received, unanswered, scratchpad and

SMS message locations can all be stored into the phonebook:

The characters *, +, P (pause), # and _ can be stored together with numbers. If the

Enter the number. Press Store .

Select SIM names.

Press . Select Phone Book.

Select Store. Select SIM names.

Enter (or confirm) the number and press OK .

Enter the name (if required) and press OK .

You will then be asked to create a voice pattern (for further

details, see section Calling phone numbers with your voice,

page12):

Press New to start the voice dialling pattern recording.

You will then be asked to say the name at least twice. Pronounce

the name as clearly as possible.

Should the voice patterns match Stored will appear in the display.

Press Exit . Confirmation of your entry and the remaining

locations will be briefly displayed.

Press Exit or to return to the standby display.

Display a number from one of the above, press Options .

Select Store. Select Phone names.

Follow the display instructions as for point 2 in the previous item.

During number and name entry a short press on Clear will clear the last character. A long press will

clear the whole display.