Operation Manual

Getting More Out of "Office Tools"

When the alarm time is reached an audible alert sounds for up to 1minute

and the LED will flash red. Alarm clock and a vibrating bell symbol will

appear in the display together with the current time and the softkeys,

Valid. and No ring .

If the phone is off at the time of the alarm, the phone will automatically

'power on' and operate the audible and visual alerts described above.

To use as a Reminder or Snooze Alarm,

If 'off' before the time of the alarm the phone remains 'on'. If the phone is

locked or the PIN setting is on it remains in this locked condition until ac-

tioned by the user.

If the alarm is acknowledged but not validated the alarm indicators will re-

main in the display for up to 15 minutes after which time the phone will

Select On and enter the alarm time (in 24 hour format) or press

OK to accept the displayed time.

Confirmation will be displayed.

Press Exit or to return to the standby display.

will be displayed on top of the display.

When 'on' the alarm will operate at the same time every day until turned off.

Press No ring , or any other key (except Valid. ) to stop the

alarm. The alarm icons remain in the display and the alarm will ring

again 3 minutes later.

Press Valid. to acknowledge and switch off the alarm.