Operation Manual

Broadcast - cell broadcast (CB) messages

These are messages broadcast by the networks to all GSM users and may provide

general information about local area dialling codes, weather reports and traffic

news etc. Each type of message is numbered enabling you to select the type of in-

formation you want to receive. Up to 5 different types of messages can be pro-

grammed into your selection list but only one can be displayed at any one time.

There are 16 standard message types pre-programmed into the phone to select

from. New message types can be programmed into the selection list using the

3digit cell broadcast type number. Contact your service provider for details on the

number and types of messages broadcast.

Before you can turn on the broadcast service you have to put at least one message

type into the selection list.

To enter a message type in the selection list

Up to 5 message types can be entered into the selection list.

Select Change password.

The old password will be requested followed by two requests to

enter the new password. Confirmation will be displayed.

Press Exit or to return to the standby display.

Press . Select Settings.

Select Broadcast.

Select Message types. Press Options .

Select Modify by list (or Modify by code if type number is

known).

Scroll to the message type required. Press Select to validate

your selection. The display will confirm your choice.

Press Options again to select more message types from the list,

enter a message type number if known or delete a message type.