Operation Manual

Getting More Out of "Settings"

or .

Ramping

Ramping is a feature that when turned on will cause the incoming

ring tone to gradually increase to the maximum volume level if the call

is not answered after the first ring.

Backlight - setting

The backlight can be adjusted to suit the surrounding light conditions.

To modify the backlight,

If the ring tone volume level is set to Off the warning icon will appear in the display.

Press . Select Settings.

Select Phone settings. Select Tones.

Select Volume.

Select Ramping.

Select On or Off.

Press Exit or to return to the standby display.

When turned on the volume of the incoming ring tone will start from the minimum and rise to the

maximum volume until answered.

Press . Select Settings.

Select Phone settings. Select Display.

Select Backlight.

Adjust the backlight using or .

Press OK to validate the setting.

Press Exit or to return to the standby display.

When the phone is connected to either the Desk Top Charger, HF Car Kit, CLA or the AC Adaptor the

backlight is always on.