Operating Instructions

Getting started

Making your first call

Turning on the phone

Stand-by display

From the stand-by display:

See page 44 to set the time and date.

Making a call

The phone can only make and receive calls when it is switched on, un-

locked (see page 16), has a valid SIM card inserted and has GSM/GPRS*

network service coverage. If the phone cannot find a valid network the dis-

play remains blank.

* The availability of GPRS depends on your mobile phone model and on your subscription

If there is not enough charge in the battery to power the phone follow the instructions for battery

charging on page 11.

Press and hold down for two seconds. If this is the first time

you have used the phone or you removed and replaced the bat-

tery, the phone prompts you for the date and time.

If you inserted the SIM card incorrectly, the error message Check

SIM! appears. Remove the cover and battery and make sure the

SIM is inserted with the gold contacts facing down.

If the mobile is locked, Code: appears.

Enter the 4digit phonelock code and press OK . The default is

4zeros, e.g. 0000.

If your SIM is PIN protected, Enter PIN: appears.

Enter the PIN code and press OK . An animated screen icon

appears, then the stand-by display.

See page 41 to change your PIN and lock codes!

Press... to...

enter phone menu.

directly access to numbers stored

in phone books.

access volume control.

access alert tones.

access the last dialled numbers

list.

stop the dialling or end a call.

enter numbers in the display (see

also "Speed dialling", page 18).

Enter the desired telephone number using the numeric keys ( -

). You can enter a maximum of 46 digits. Correct any mistakes

by pressing Clear . Hold down this key or press to clear the

whole display.

To dial (send) the number press .