Operating Instructions

To turn off or check the status of call divert:

To cancel all (multiple) diverts:

Caller Line Identity - showing/hiding your mobile number

Most networks allow the Caller Line Identity feature (CLI) i.e. showing

the incoming number (ID) while receiving a call. Selecting Receiving

caller ID allows you to check its availability from the network.

Receiving caller ID

To find out whether a network presents the ID of incoming calls:

To hide your number, on a call by call basis, add #31# before the

number you are calling. Alternatively you can ask your service operator

to always disable the sending of your mobile number. In this case to

reveal your number, on a call by call basis, add *31# before the

number you wish to call.

Standard network setting

To reset the standard network setting for sending your mobile ID:

Use or to choose between Voice Mail, Names or Number.

Press Select or to validate your selection.

The display confirms your request.

Press Exit or to return to the stand-by display.

1. If you select 'On no reply' option you must also enter a delay period of 5, 15 or 30 seconds.

2. Call diverts for both Line 1 and Line 2 must be set individually. Select the out-going line before

following the above procedure. To carry out a call divert on the other line you must select this other

line first (menu Calls & Times - Line selection).

Press . Select Settings.

Select GSM Services. Select Call diverting.

Select from the divert options and press .

Select Cancel or Status.

The phone confirms your selection.

Press Exit or to return to the stand-by display.

Press . Select Settings.

Select GSM Services. Select Call diverting.

Select Cancel all. The phone confirms your selection.

Press Exit or to return to the stand-by display.

This action cancels all voice diverts (for voice, faxes and data calls) for the line currently in use. To

cancel call diverts for the other line you must select this other line first (menu Calls & Times - Line

selection).

Press . Select Settings.

Select GSM Services. Select Receiving caller ID.

The network returns either Presentation available or Presen-

tation unavailable.

Press Exit or to return to the stand-by display.

Press . Select Settings.