Operating Instructions

Using your phone

Volume adjustment

To adjust the volume:

Sending DTMF tones

Some remote access services require DTMF tones. These tones are used by regular

telephones when you dial and when you answer questions from an automated

voice service. If you are in a conversation and manually entering the numbers, no

extra configuration is necessary. If, however, you want to send a number stored in

memory, you must set DTMF to automatic.

Manually

To send individual DTMF tones directly from the keypad during a conversa-

tion:

The tones are heard in the earpiece and sent immediately.

Automatically

To send a consecutive string of DTMF tones during a conversation:

Pause feature

You can enter and store telephone numbers and a sequence of DTMF tones togeth-

er as long as you separate them by a 'pause'. To enter a pause between numbers,

press and hold down . The letter p appears. The phone can store several pauses

together for a maximum of 20-46 characters (dependent upon the SIM and the

phone memory capacity).

Select Unmute. A warning message appears in the display.

disappears.

A new call restores the microphone to on.

Use or to increase or decrease the volume and press OK .

Press Exit or wait 2 seconds to return to the previous display.