Directions for Use

Try to remember the phonelock and PIN codes associated with the use of this phone.

Become familiar with and use the security features to block unauthorised use if your

phone and/or SIM card are lost or stolen. Call your service provider immediately to

prevent illegal use.

When you are not using the telephone, close the Telephone application of your Mondo and

activate the Safety mode if necessary.

Security codes

The phone and SIM card are delivered to you pre-programmed with codes that protect the

phone and SIM card against unauthorised use.

When requested to enter any of the codes, key in the number (appears as * asterisks

in the display) and click on ok.

Keying mistakes can be erased by pressing Clear.

If you enter the wrong code an appropriate message will be displayed.

Codes supplied with the SIM card are:

Ø PIN and PIN2 codes (4-8 digits)

The PIN (Personal Identity Number) is supplied with all SIM cards and protects the

card against unauthorised use.

The PIN2 code, supplied with some SIM cards, is required to gain access to some

features in the phone (such as fixed dialling numbers) for which another level of

security is required.

If Enter PIN: appears in the display, enter the code and click on ok.

Entering the wrong PIN code three times in succession will disable the SIM card

and the message SIM Blocked. Enter PUK: will appear in the display. To unblock

the SIM you will need the PUK (PIN Unblock Key) code, obtainable only from your

service provider.

Ø PUK and PUK2 codes (8 digits)

The PUK code is supplied with the SIM card and is used to unblock a disabled

SIM card.

When requested enter the PUK code and click on ok. You will be requested to reset

the PIN code. Follow the instruction in the display.

The PUK2 code is required to unblock the PIN2 code.

Code supplied by the airtime service provider

Ø Call barring password (4 digits)

This password is used to bar various types of calls, made or received, from the

phone.

Ø Voice mail password

This password protects you against unauthorised access to your voice mail.

Code supplied by the manufacturer

Ø Phonelock code (4 digits)

This code is set to all zeros on delivery and is user re-settable. Once changed it cannot

be identified by the manufacturer over the phone.

It is strongly recommended that you remember and make yourself familiar with the purpose

and operation of these codes.

papier-gb.indd 30/07/01, 15:2010