Operating Instructions

Getting More Out of "Internet"
55
Storing/editing the connection settings
(obtainable from your network operator)
Before proceeding and if you have not already done so please enter the
current time and date as described on page 48.
The profile list can contain up to 10 profiles.
To enter and store the profile details,
* GPRS availability is operator dependent
Press . Select Internet.
Select Profile list.
Select an empty profile ([...]) and press New .
Enter the Proxy name and press OK .
Select the Gateway settings.
Enter the IP address and press OK .
Enter the Home page address and press OK .
Select the Activate security settings for the connection (Never,
Automatic or Always) and press Select .
Validate the Normal port address and press OK .
Validate the Secure port address and press OK .
Select the Send characteristics settings (On or Off) and press
Select .
Press End , then select Yes to confirm data storage.
Select the Circuit access settings.
Enter the Phone number and press OK .
Enter the Login name and press OK .
Enter the Login password. Each character will turn into a star (*)
after a short while. Press OK .
Select the transmission Speed (9600 or 14400) - if required -
and press Select .
Select the transmission Mode ( Numeric or Analog ) and press Select .
Enter the Automatic disconnection time and press OK .
Press End , then select Yes to confirm data storage.
Select the Packets settings *.
Choose a GPRS Access point names and press Select .
Enter the Automatic disconnection time and press OK .
Press End , then select Yes to confirm data storage.
Select the Connection mode (Circuits, Packets * or Circuits +
packets) and press Select .
Select the Push Parameters settings.
Enter the Push Proxy SMS centre phone number and press OK .
Enter the Push Proxy SMS address and Push Proxy IP
address phone numbers and press OK .
Press End , then select Yes to confirm data storage.
Press Exit or to return to the standby display.
1
2
3
4
5
6
7
8
9
10
11